Industrial IoT Gateway Board, WF-RK3566, AndroidSBC, Jakarta

TL;DR: Industrial IoT Gateway Board

LONGGANG, Shenzhen, September 10, 2026 - A 34,435-unit WF-RK3566 order for Jakarta, Indonesia completed burn-in and documentation at the Wanlin Longgang plant this week, the 337th lot released on the Rockchip RK3566 line.

AndroidSBC customs and certification briefing for Allwinner and Rockchip board shipments serving Jakarta, Indonesia. The WF-Series spans nine boards in one line: WF-A133 on the Allwinner A133 quad-core Cortex-A53 1.5GHz platform with the PowerVR GE8300 GPU, WF-H618 on the Allwinner H618 with 8K H.265 decode, WF-T527 on the Allwinner T527 octa-core Cortex-A55 with a 2 TOPS NPU, and the Rockchip side of the line covering WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, and WF-RK3588S. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the whole line from the Longgang source factory in Shenzhen to Jakarta and Indonesia importers running OTT TV box, Android TV, commercial display, industrial control, edge AI, POS terminal, kiosk, and IoT gateway programmes.

About AndroidSBC and the Rockchip RK3566 Board Family

Wanlin Manufacturing Group has been building Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-Series is the current custom board line: Allwinner A133, H618, and T527 on one side, Rockchip RK3588, RK3568, RK3566, and RK3288 on the other, with WF-A133S and WF-RK3588S covering buyers who want an SOM plus their own carrier. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks, and EMC pre-compliance bench. Jakarta and Indonesia buyers typically come to the WF-Series for one of three reasons: a multi-platform catalogue, a source factory that will take OEM branding work, or a supplier who will carry the certification paperwork instead of leaving it to the importer.

WF-RK3566 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3566 (Machine Vision and HMI Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Indonesia importers sourcing the WF-Series, the 2GB + 16GB (WF-RK3566-A) variant is the typical configuration for the machine vision and human-machine interface use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Machine Vision and HMI Board for Indonesia Buyers

The recurring problem for Jakarta and Indonesia buyers sourcing a machine vision and hmi board is not the headline unit price, it is whether the allocation actually holds. The Rockchip RK3566 needs its own wafer slot, and brokers who quote from stock frequently cannot honour that slot once a 34,435-unit push lands mid-quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Jakarta have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves both risks inside the factory: the certified image is burned at Longgang, the burn-in record is attached per unit barcode, and the Technical File ships with the lot. Across the nine WF-Series boards the coverage runs from machine vision, human-machine interface, smart camera, industrial monitoring, edge AI development, digital signage, education terminal, and IoT gateway, with three memory configurations per model, so a Jakarta buyer can usually match a requirement from standard stock.

Buyers in Indonesia tend to ask about the local mark before they ask about price. In Indonesia SDPPI type approval is held by the local importer, and the SNI mark is checked separately for goods offered in the domestic market. AndroidSBC handles that by preparing the destination-market file covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo) alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Tanjung Priok on the Tanjung Priok to Shekou lane.

Competitive Comparison: WF-RK3566 vs Competing RK3566 Boards

Three families of board chase the same machine vision and hmi board socket. The first is legacy silicon at a low price with no software certification, the second is Cortex-A55 hardware with certification but limited decode headroom, and the third carries both yet treats expansion as an afterthought. The WF-RK3566 belongs to the third family and separates itself on Rockchip RK3566, sustained display output under load, and a certified image burned per lot.

• vs RK3288 Cortex-A17 boards: the RK3566 Cortex-A55 1.8GHz adds a 1 TOPS NPU the older platform never had.
• vs RK3568 boards: the RK3566 trades the second Ethernet port for a lower BOM on camera and HMI builds.
• vs Raspberry Pi 4 form factor SBCs: the RK3566 adds onboard eMMC, MIPI CSI, and an industrial temperature envelope.
• vs USB-camera-only boards: the RK3566 native MIPI CSI path removes the USB bandwidth ceiling from the vision pipeline.

Global Machine Vision and Embedded HMI Market Trends

The Machine Vision and Embedded HMI curve is what Indonesia importers read before committing to a machine vision and hmi board programme. The number they quote is the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), which serves as the closest public proxy for Android silicon demand. For Jakarta that resolves into three demand patterns across the WF-Series order book:

• Machine vision: WF-RK3566 runs the vision model on the NPU against the MIPI CSI frame stream.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3566 board carries that headroom without a board change.
• Smart camera: WF-RK3566 encodes the 4K@60fps stream next to the inference loop.

For the Machine Vision and Embedded HMI category the practical signal in Indonesia is that framework agreements are replacing spot buying, and the agreements are getting longer.

Across those three segments, Jakarta procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a retail or hospitality programme needs a twelve-month shipping window.

Partner Success Story: Orion Transit Systems in Jakarta, Indonesia

Orion Transit Systems, a rail information systems contractor serving the Indonesia market, deployed 5,700 units of the WF-RK3568 board for platform information displays. The rollout covered the machine vision, smart camera, and digital signage workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,700 units of the WF-RK3568 board for platform information displays
• Region: Jakarta, Indonesia
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Tanjung Priok via the Tanjung Priok to Shekou lane

"Platform displays run 7x24 with no one watching. The watchdog and the scheduled restart on the RK3568 board mean our maintenance visits are scheduled, not reactive."

- James Whitfield, Programme Manager

Field Report: a machine-tool retrofit at a manufacturing plant outside Jakarta, where 34,435 units of the WF-RK3566 board were commissioned onto existing production lines

Reporter Mao Yi, on the ground in Jakarta, Indonesia. Commissioning engineers wired the WF-RK3566 boards into the existing fieldbus and ran a 96-hour production trial before sign-off. The boards held the cycle time on every line, and the plant's maintenance team kept two spares per line on the shelf rather than a full spare controller.

Pallet weights were checked against the packing list at the dock, and the container was sealed 25 minutes before the cut-off.

The inspection confirmed three things on the spot: the WF-RK3566 units hold the burn-in with a yield above 99.35 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo), cleared for entry at Port of Tanjung Priok on the Tanjung Priok to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Indonesia importers can hand straight to their customs broker.

Filed by Mao Yi, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3566 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3566 (Machine Vision and HMI Board) as the lead SKU for Jakarta and Indonesia programmes:

• Machine vision: WF-RK3566 runs the vision model on the NPU against the MIPI CSI frame stream.
• Human-machine interface: WF-RK3566 drives the HMI panel over eDP with the 40-pin GPIO header for the button matrix.
• Smart camera: WF-RK3566 encodes the 4K@60fps stream next to the inference loop.
• Industrial monitoring: WF-RK3566 holds the wide-temperature envelope on the fanless board.
• Edge AI development: WF-RK3566 exposes the NPU toolchain through the Android 11 and Linux BSP.
• Digital signage: WF-RK3566 plays the 4K loop over HDMI 2.0.
• Education terminal: WF-RK3566 runs the Android 11 classroom image on the Pi form factor board.
• IoT gateway: WF-RK3566 pairs WiFi 6 with the Gigabit uplink.

Partnership Models for Jakarta Buyers

For Jakarta distributors and brand owners, AndroidSBC opens the machine vision and hmi board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a Indonesia partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-RK3566 is the 2GB + 16GB (WF-RK3566-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Indonesia?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a Indonesia market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a Indonesia partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Yocto or Debian or Buildroot, and BSP ports for customer carriers. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3566 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3566 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Buyers in Jakarta and Indonesia looking to source the WF-RK3566 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: SDPPI type approval with SNI conformity for domestic sale for Indonesia, administered by SDPPI (Kominfo), entering at Port of Tanjung Priok on the Tanjung Priok to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope, and Incoterm. Provide those and a per-lot quote plus the WF-Series MOQ matrix comes back within two business days.