Dual Display Android Motherboard, WF-A133S, AndroidSBC, Jakarta

TL;DR: Dual Display Android Motherboard

SHENZHEN, China, September 10, 2026 - The WF-A133S board line at Wanlin Longgang closed lot 245 this week. 27,910 units are now booked for Jakarta, Indonesia, shipped FOB with the full certification file attached.

AndroidSBC cross-border logistics briefing serving Jakarta, Indonesia. The line runs from the Allwinner A133 display board at the entry tier up to the Rockchip RK3588 eight-core board for video wall and AI work, with the Allwinner T527 octa-core board and the Rockchip RK3568, RK3566, and RK3288 filling the industrial, vision, and POS tiers between them. AndroidSBC ships the whole range from the Wanlin Longgang plant, and Jakarta buyers can mix platforms inside a single framework agreement rather than opening a new supplier file for each tier.

About AndroidSBC and the Allwinner A133 Board Family

Wanlin Manufacturing Group has been building Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-Series is the current custom board line: Allwinner A133, H618, and T527 on one side, Rockchip RK3588, RK3568, RK3566, and RK3288 on the other, with WF-A133S and WF-RK3588S covering buyers who want an SOM plus their own carrier. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks, and EMC pre-compliance bench. Jakarta and Indonesia buyers typically come to the WF-Series for one of three reasons: a multi-platform catalogue, a source factory that will take OEM branding work, or a supplier who will carry the certification paperwork instead of leaving it to the importer.

WF-A133S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-A133S (Core Board SOM and Custom Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Indonesia importers sourcing the WF-Series, the 2GB + 16GB, 200-pin B2B (WF-A133S-A) variant is the typical configuration for the custom carrier board and SOM integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Core Board SOM and Custom Carrier Board for Indonesia Buyers

Buyers in Jakarta who have sourced a core board som and custom carrier board for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Allwinner A133 is allocated at wafer level, and a 27,910-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.

The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the certified image burn, the burn-in record, and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine boards in the WF-Series cover custom carrier board design, SOM integration, industrial panel builds, medical device carriers, vending machine control, access control, and bespoke kiosk hardware and each one carries three memory configurations, which keeps Jakarta and Indonesia buyers on standard SKUs for most requirements.

Buyers in Indonesia tend to ask about the local mark before they ask about price. In Indonesia SDPPI type approval is held by the local importer, and the SNI mark is checked separately for goods offered in the domestic market. AndroidSBC handles that by preparing the destination-market file covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo) alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Tanjung Priok on the Tanjung Priok to Shekou lane.

Competitive Comparison: WF-A133S vs Competing A133 Boards

Competing boards in the core board som and custom carrier board category sort into three camps: cheap legacy SoC boards, mid-range Cortex-A55 boards with certification, and 64-bit boards with real expansion. The WF-A133S is in the last camp, and its edge is Allwinner A133 plus a display path that holds under a continuous loop rather than a bench test.

• vs fixed-connector motherboards: the WF-A133S SOM breaks every display and serial path out to a carrier, so the enclosure drives the board and not the reverse.
• vs other 22nm SOM modules: the A133 SOM keeps the PowerVR GE8300 GPU and the 4K@30fps decode path on a 45mm square module.
• vs NXP i.MX SOM pricing: the A133 SOM holds a materially lower unit cost for Android-class kiosk workloads.
• vs full custom motherboard projects: the SOM route removes the DDR routing risk and shortens the carrier design cycle to six weeks.

Global Custom SOM and Carrier Board Engineering Market Trends

The Custom SOM and Carrier Board Engineering curve is what Indonesia importers read before committing to a core board som and custom carrier board programme. The number they quote is the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), which serves as the closest public proxy for Android silicon demand. For Jakarta that resolves into three demand patterns across the WF-Series order book:

• Custom carrier board design: WF-A133S plugs the SOM into the customer carrier over the 200-pin B2B connector.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-A133S board carries that headroom without a board change.
• Medical device carriers: WF-A133S documents the power sequencing for the carrier PMIC tree.

What the Custom SOM and Carrier Board Engineering data does not show is the operational cost of a supply break, which is why Jakarta buyers increasingly weight supplier continuity above a marginal price difference.

Across those three segments, Jakarta procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a retail or hospitality programme needs a twelve-month shipping window.

Partner Success Story: Kestrel Retail Systems in Jakarta, Indonesia

Kestrel Retail Systems, a convenience retail operator serving the Indonesia market, deployed 9,600 units of the WF-RK3288 POS and signage board for a store estate refresh. The rollout covered the custom carrier board design, medical device carriers, and bespoke kiosk hardware workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 9,600 units of the WF-RK3288 POS and signage board for a store estate refresh
• Region: Jakarta, Indonesia
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Tanjung Priok via the Tanjung Priok to Shekou lane

"We needed a board that would still take the new payment SDK without a hardware change. The long-term support image on the RK3288 gave us Android 11 on the same footprint we had already designed the terminal around."

- Oliver Hartley, Procurement Director

Field Report: a machine-tool retrofit at a manufacturing plant outside Jakarta, where 27,910 units of the WF-A133S board were commissioned onto existing production lines

Reporter Jiang Bo, on the ground in Jakarta, Indonesia. Commissioning engineers wired the WF-A133S boards into the existing fieldbus and ran a 96-hour production trial before sign-off. The boards held the cycle time on every line, and the plant's maintenance team kept two spares per line on the shelf rather than a full spare controller.

The line ran the WF-A133S boards through a 30-minute HDR10 loop at the inspection bench with no colour banding reported by the operator.

The inspection confirmed three things on the spot: the WF-A133S units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo), cleared for entry at Port of Tanjung Priok on the Tanjung Priok to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Indonesia importers can hand straight to their customs broker.

Filed by Jiang Bo, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-A133S Application Scenarios

The WF-Series fits nine application lanes, with the WF-A133S (Core Board SOM and Custom Carrier Board) as the lead SKU for Jakarta and Indonesia programmes:

• Custom carrier board design: WF-A133S plugs the SOM into the customer carrier over the 200-pin B2B connector.
• Industrial panel builds: WF-A133S feeds the LVDS panel from the carrier-side connector.
• Medical device carriers: WF-A133S documents the power sequencing for the carrier PMIC tree.
• Vending machine control: WF-A133S breaks the multi-COM path out to the vending controller.
• Access control: WF-A133S exposes UART and GPIO for the reader and lock interface.
• Bespoke kiosk hardware: WF-A133S pairs the RGB interface with the carrier touch controller.
• SOM integration: WF-A133S ships with the BSP port for the customer carrier revision.
• Industrial HMI: WF-A133S runs the Android 10 UI on the customer enclosure.

Partnership Models for Jakarta Buyers

For Jakarta distributors and brand owners, AndroidSBC opens the core board som and custom carrier board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from the Wanlin Longgang source factory in Shenzhen under the same per-lot documentation pack. For Jakarta buyers, a typical first order on the WF-A133S is the 2GB + 16GB, 200-pin B2B (WF-A133S-A) configuration at MOQ 5,000 units per shipment, with a four-week sample lead time and a six-week mass production lead time.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Indonesia?

Answer: That is handled in-house. Each lot leaves Longgang with a Declaration of Conformity and a Technical File holding the CE, FCC Part 15, UKCA, RoHS 2.0, and REACH documents, all dated inside twelve months. For Indonesia specifically, AndroidSBC will confirm at quotation stage which marks apply and whether a local variation is required, so the paperwork question is settled before production rather than at the port.

What are the MOQ and lead time for a first order?

Answer: MOQ is 5,000 units per shipment for the standard memory configuration of any WF-Series board. Sample lead time runs four weeks and mass production six weeks. Partners who prefer a twelve-month blanket order with a monthly lot release can negotiate the MOQ down, and mixed-platform orders on one purchase order are accepted.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Yocto or Debian or Buildroot, and BSP ports for customer carriers. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-A133S unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-A133S Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Buyers in Jakarta and Indonesia looking to source the WF-A133S straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: SDPPI type approval with SNI conformity for domestic sale for Indonesia, administered by SDPPI (Kominfo), entering at Port of Tanjung Priok on the Tanjung Priok to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope, and Incoterm. Provide those and a per-lot quote plus the WF-Series MOQ matrix comes back within two business days.