RK3588 8K@30fps Custom Encoder Board, WF-C3588-P8, AndroidSBC, Jakarta

TL;DR: RK3588 8K@30fps Custom Encoder Board

Jakarta, Indonesia - September 12, 2026. The 216th WF-C3588-P8 shipment left Shenzhen for Jakarta this week with 6,160 units aboard, after a full burn-in cycle and a destination-market document check.

AndroidSBC release of the nine-variant custom RK3588 motherboard platform for OEM and ODM projects serving Jakarta, Indonesia. The line spans custom Android motherboards at the entry variant through core-board-plus-carrier work at the SOM end, all on the same Rockchip RK3588 silicon with 6 TOPS NPU, 8K H.265 decode and up to 32GB of LPDDR5. AndroidSBC ships the full range from the Wanlin Longgang plant, and Jakarta buyers can mix custom variants inside a single framework agreement rather than opening a new supplier file for each product line.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building custom OEM and ODM boards on Rockchip silicon. The line this release covers is the WF-C3588: nine custom motherboard variants built on the same Rockchip RK3588 octa-core 8nm platform with 6 TOPS NPU and 8K H.265 video, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant in Shenzhen builds the WF-C3588 for Indonesia OEM, integrator and distributor programmes. For a Jakarta buyer the practical value of the line is that one silicon and one supplier file cover nine custom categories.

WF-C3588-P8 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-P8 (Custom ARM PC, Mini PC and NAS Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Indonesia importers sourcing the WF-Series, the 16GB + 256GB (WF-C3588-P8-C) variant is the typical configuration for the custom ARM PC and NAS programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom ARM PC, Mini PC and NAS Board for Indonesia Buyers

Buyers in Jakarta who have sourced a custom arm pc, mini pc and nas board for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 6,160-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.

The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the custom board build, the certified image burn, the burn-in record and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine variants in the WF-C3588 cover ARM PCs, mini PCs, thin clients, NAS enclosures, media stations, home theatre systems, desktop workstations, and personal cloud devices and each one carries three memory configurations, which keeps Jakarta and Indonesia buyers on standard custom SKUs for most requirements.

The Indonesia paperwork question is settled before production. In Indonesia SDPPI type approval is held by the local importer, and the SNI mark is checked separately for goods offered in the domestic market. The Longgang export desk prepares the destination-market file covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo) and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), booking the lot into Port of Tanjung Priok on the Tanjung Priok to Shekou lane.

Competitive Comparison: WF-C3588-P8 vs Competing RK3588 Boards

The boards competing for the same socket in the custom arm pc, mini pc and nas board segment fall into three groups: off-the-shelf catalogue boards with no customization path, re-badged imports where the seller controls neither PCB nor firmware, and source-factory custom platforms with an engineering desk behind them. The WF-C3588-P8 sits in the third group and adds three things: Rockchip RK3588 silicon, an I/O and thermal profile that survives a continuous decode-and-NPU loop, and the per-lot certified image burn at Longgang.

• vs x86 entry desktops: the WF-C3588-P8 runs office and media workloads at a fraction of the power draw, which is the argument for fleet and education deployments.
• vs consumer ARM sticks: dual SATA bays, NVMe and dual GbE make it a real NAS and desktop board rather than a streaming stick.
• vs single-line mini PC brands: the customization path lets a brand keep one platform across a product family while varying memory, storage and chassis.
• vs assembled import boxes: the seven-year supply commitment and the per-lot file give a PC brand a lifecycle story instead of a spot buy.

Global Custom ARM PC and NAS Board Market Trends

The Custom ARM PC and NAS Board market sets the pace for Jakarta procurement this year, and it does not move on its own. The Edge AI hardware segment that MarketsandMarkets values at USD 26.9 billion in 2025, with a 32.7 percent CAGR reaching USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), sets the silicon allocation backdrop that custom RK3588 motherboard buyers also compete for. Three patterns stand out in the WF-C3588 order book for Indonesia:

• Fleet desktop programme: an enterprise replaces ageing towers with fanless ARM PCs at a third of the power draw.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-P8 board carries that headroom without a board change.
• Home NAS enclosure: a storage brand ships a dual-bay NAS with the NPU running photo search locally.

What the Custom ARM PC and NAS Board data does not show is the operational cost of a supply break, which is why Jakarta buyers increasingly weight supplier continuity above a marginal price difference.

Read together, the three patterns explain the move in Jakarta from spot quotes to framework agreements released monthly, which is what a custom RK3588 motherboard programme needs to hold a twelve-month shipping window without a mid-year break.

Partner Success Story: Kestrel Signage Works in Jakarta, Indonesia

Kestrel Signage Works, a digital signage OEM serving the Indonesia market, deployed 9,700 custom WF-C3588-S3 signage boards for a multi-market DOOH and indoor network. The rollout covered the fleet desktop programme, home nas enclosure, and personal cloud device workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 9,700 custom WF-C3588-S3 signage boards for a multi-market DOOH and indoor network
• Region: Jakarta, Indonesia
• Models used: WF-C3588-P8 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Shanghai Yangshan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Tanjung Priok via the Tanjung Priok to Shekou lane

"We came with a block diagram and a deadline. AndroidSBC turned it into a quad-output carrier with our connector set and our boot animation, and the first production lot landed inside the fifteen-to-thirty-day window they quoted at schematic sign-off."

- Maarten de Vries, Director of Operations

Field Report: a self-service kiosk fleet rollout in Jakarta, where 6,160 units of the WF-C3588-P8 board are being fitted into payment terminals across a retail estate

Reporter Pan Ze, on the ground in Jakarta, Indonesia. The integrator staged the WF-C3588-P8 boards at a regional depot, flashed the estate image, and shipped them to stores in waves of forty. Each terminal was paired to the payment application at the store, and the depot kept a rolling stock of pre-flashed boards so a failed unit could be swapped inside a single service visit.

The QA lead noted that the WF-C3588-P8 lot was the third consecutive run to clear the aging bench without a retest.

The inspection confirmed three things on the spot: the WF-C3588-P8 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo), cleared for entry at Port of Tanjung Priok on the Tanjung Priok to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Indonesia importers can hand straight to their customs broker.

Filed by Pan Ze, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-P8 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-P8 (Custom ARM PC, Mini PC and NAS Board) as the lead SKU for Jakarta and Indonesia programmes:

• Fleet desktop programme: an enterprise replaces ageing towers with fanless ARM PCs at a third of the power draw.
• Thin client estate: a bank standardises on one board class across branches with a locked Ubuntu image.
• Home NAS enclosure: a storage brand ships a dual-bay NAS with the NPU running photo search locally.
• Media station build: a CE brand pairs the board with an 8K panel and Widevine-level DRM for a premium player.
• Education desktop: a district deploys locked-down student desktops with MDM enrolment out of the box.
• Personal cloud device: a privacy-focused brand runs sync and backup locally with no cloud dependency.
• Trading desktop: a finance team runs four screens from one board with the desktop image tuned for stability.
• Developer workstation: an engineering shop issues Ubuntu workstations with the NPU for local model testing.

Partnership Models for Jakarta Buyers

Three commercial structures are open to Jakarta buyers on the WF-C3588-P8 and the rest of the WF-C3588 custom variants:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from Longgang under one documentation pack covering CE, FCC, UKCA, RoHS and IEC 62368-1. A Jakarta first order on the WF-C3588-P8 is normally the 16GB + 256GB (WF-C3588-P8-C) configuration at MOQ 5,000 units per shipment, standard samples in 1-3 days and 15-30 days to production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Practically the layers that decide whether the board fits your product: the PCB layout and outline, the memory and storage fit (4GB to 32GB LPDDR4X/LPDDR5, eMMC to 128GB plus NVMe or SATA), the display interface mix (HDMI 2.1, DP 1.4, LVDS/eDP/MIPI), the I/O bank (CAN, RS232/RS485 multi-serial, relays, digital I/O), the wireless stack, and the enclosure or DIN-rail chassis. On top of that sit the firmware options: custom Android ROM with a locked launcher, custom Linux or Yocto image, pre-installed applications, custom boot animation and OTA updates. A Indonesia buyer can start from a standard WF-C3588 variant and change one layer, or bring a full schematic and have the carrier designed from scratch.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services and a locked launcher, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and driver development for project-specific I/O. Source access is released to the partner, and the port is performed at Longgang, which matters because a vendor BSP rarely matches a custom carrier revision on the first try.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how Indonesia partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Samples of standard variants leave the factory in 1-3 days. Custom builds run 15-30 days to mass production once the design is signed off, with the schematic review and carrier design handled in the same window. MOQ sits at 5,000 units per shipment on standard configurations, custom runs are quoted against volume, and small pilot batches are accepted for first-article programmes.

What certifications does a custom board need for Indonesia, and who handles them?

Answer: AndroidSBC handles them at the factory. Every lot ships with a Declaration of Conformity and a Technical File covering CE (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), FCC Part 15, UKCA where relevant, RoHS 2.0 and the REACH declaration, all dated within the prior twelve months. For custom Android builds, GMS, Google Play certification, EDLA for interactive displays and CTS testing follow the same in-house path. Where a Indonesia market needs an additional national mark, the export desk confirms coverage before the order is confirmed rather than after.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum supply, patches maintained across the firmware lines, OTA for firmware and NPU model updates. For a Indonesia programme running a custom board in the field, that commitment is written into the agreement at signature, which is what separates a source factory from a catalogue reseller.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes, including DDP into Amazon FBA in the US, EU and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-C3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-C3588-P8 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record and the configuration file are attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a custom configuration is holding up a production line.

Contact AndroidSBC: Start Your WF-C3588-P8 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Jakarta and Indonesia. Direct factory contact on the WF-C3588-P8 and the rest of the custom arm pc, mini pc and nas board line is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: SDPPI type approval with SNI conformity for domestic sale for Indonesia, administered by SDPPI (Kominfo), entering at Port of Tanjung Priok on the Tanjung Priok to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM and ODM enquiries move fastest when the first message carries the annual volume, the customization scope and the Incoterm. Send those three and the export desk replies with a per-lot quote and the full WF-C3588 MOQ matrix inside two business days.