RK3588 Custom B2B Core Board, WF-C3588-I1, AndroidSBC, Jakarta

TL;DR: RK3588 Custom B2B Core Board

Jakarta, Indonesia - September 12, 2026. A 26,170-unit consignment of WF-C3588-I1 boards left the Wanlin Longgang source factory for Jakarta this week, the 124th production lot released on the Rockchip RK3588 line.

AndroidSBC field engineering dispatch on live custom RK3588 board deployments serving Jakarta, Indonesia. AndroidSBC is opening the full WF-C3588 custom motherboard programme to Indonesia: nine variants on the Rockchip RK3588 platform with 6 TOPS NPU, 8K H.265 decode, dual Gigabit Ethernet and up to 32GB of LPDDR5. Every variant ships from the Wanlin Longgang facility with OEM branding available, ODM carrier design handled in-house, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation.

About AndroidSBC and the Rockchip RK3588 Board Family

Wanlin Manufacturing Group has been building custom Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-C3588 is the current custom motherboard programme: nine variants on the same Rockchip RK3588 octa-core 8nm silicon with 6 TOPS NPU, 8K H.265 decode, dual Gigabit Ethernet and up to 32GB of LPDDR5. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks and EMC pre-compliance bench. Jakarta and Indonesia buyers typically come to the WF-C3588 for one of three reasons: nine custom categories on one silicon, a source factory that takes OEM and ODM work seriously, or a supplier that carries the certification paperwork instead of leaving it to the importer.

WF-C3588-I1 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-I1 (Custom Industrial Motherboard for Fanless and Wide-Temperature Control) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Indonesia importers sourcing the WF-Series, the 8GB + 32GB (WF-C3588-I1-B) variant is the typical configuration for the custom industrial control and HMI programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Industrial Motherboard for Fanless and Wide-Temperature Control for Indonesia Buyers

What breaks Indonesia sourcing plans on the custom industrial motherboard for fanless and wide-temperature control line is not price negotiation, it is the second shipment. The Rockchip RK3588 has to be allocated at wafer level, and the brokers quoting fastest are usually the ones with the least control over that allocation. The software side is the second exposure. A board that boots on the bench is not the same as a board that carries the certified stack a Indonesia channel will accept, and the difference usually shows up during inbound inspection rather than at the factory gate.

Then there is the certification file. A stamp is cheap; a Technical File with notified-body reports dated inside twelve months is not, and the difference only matters when a Indonesia customs officer asks for it. AndroidSBC closes the loop at the source factory: custom configuration assembled, certified image burned, burn-in barcode attached per unit, Technical File issued with the lot. The nine WF-C3588 variants cover industrial HMIs, panel PCs, PLC upgrades, SCADA nodes, DIN-rail controllers, factory automation, data acquisition, IIoT gateways, and machine control and each ships in three memory configurations, so most Jakarta requirements can be met from standard stock rather than a from-scratch run.

The Indonesia paperwork question is settled before production. In Indonesia SDPPI type approval is held by the local importer, and the SNI mark is checked separately for goods offered in the domestic market. The Longgang export desk prepares the destination-market file covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo) and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), booking the lot into Port of Tanjung Priok on the Tanjung Priok to Shekou lane.

Competitive Comparison: WF-C3588-I1 vs Competing RK3588 Boards

The boards competing for the same socket in the custom industrial motherboard for fanless and wide-temperature control segment fall into three groups: off-the-shelf catalogue boards with no customization path, re-badged imports where the seller controls neither PCB nor firmware, and source-factory custom platforms with an engineering desk behind them. The WF-C3588-I1 sits in the third group and adds three things: Rockchip RK3588 silicon, an I/O and thermal profile that survives a continuous decode-and-NPU loop, and the per-lot certified image burn at Longgang.

• vs commercial boards in industrial dress: the WF-C3588-I1 is designed to -40C to 85C from the schematic up, not a consumer board with a bigger heatsink.
• vs local integrator bundles: the carrier design, the BSP port and the DIN-rail chassis all come from one Longgang engineering desk, so responsibility never splits across vendors.
• vs legacy PLC upgrade paths: the 6 TOPS NPU adds on-device vision and predictive maintenance to a PLC retrofit without a separate AI box.
• vs trading-company boards: the per-lot Technical File, the aging record and the EMC pre-compliance bench all live inside the source factory.

Global Custom Industrial Motherboard and Panel PC Market Trends

The Custom Industrial Motherboard and Panel PC market sets the pace for Jakarta procurement this year, and it does not move on its own. The Edge AI hardware segment that MarketsandMarkets values at USD 26.9 billion in 2025, with a 32.7 percent CAGR reaching USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), sets the silicon allocation backdrop that custom RK3588 motherboard buyers also compete for. Three patterns stand out in the WF-C3588 order book for Indonesia:

• Industrial HMI panel: a machine builder replaces an aging Windows panel with a fanless HMI running a Yocto image and a custom UI.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-I1 board carries that headroom without a board change.
• SCADA edge node: a utility deploys DIN-rail controllers that aggregate substation data and push it over dual Gigabit links.

The Custom Industrial Motherboard and Panel PC commentary has shifted from unit growth to supply reliability, and that shift favours suppliers who control their own SMT and burn-in lines.

Read together, the three patterns explain the move in Jakarta from spot quotes to framework agreements released monthly, which is what a custom RK3588 motherboard programme needs to hold a twelve-month shipping window without a mid-year break.

Partner Success Story: Borealis Fleet Systems in Jakarta, Indonesia

Borealis Fleet Systems, a fleet telematics provider serving the Indonesia market, deployed 4,100 custom WF-C3588-A0 Android boards for commercial vehicle telematics terminals. The rollout covered the industrial hmi panel, scada edge node, and factory automation cell workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 4,100 custom WF-C3588-A0 Android boards for commercial vehicle telematics terminals
• Region: Jakarta, Indonesia
• Models used: WF-C3588-I1 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Shanghai Yangshan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Tanjung Priok via the Tanjung Priok to Shekou lane

"Wide DC input, wide temperature, and a locked Android build with our telematics stack pre-installed. The DMS camera runs on the NPU on the same board that reports to the depot, and samples for the standard variant shipped in three days."

- Piotr Nowak, Engineering Manager

Field Report: a self-service kiosk fleet rollout in Jakarta, where 26,170 units of the WF-C3588-I1 board are being fitted into payment terminals across a retail estate

Reporter Fang Yu, on the ground in Jakarta, Indonesia. The integrator staged the WF-C3588-I1 boards at a regional depot, flashed the estate image, and shipped them to stores in waves of forty. Each terminal was paired to the payment application at the store, and the depot kept a rolling stock of pre-flashed boards so a failed unit could be swapped inside a single service visit.

The QA lead noted that the WF-C3588-I1 lot was the third consecutive run to clear the aging bench without a retest.

The inspection confirmed three things on the spot: the WF-C3588-I1 units hold the burn-in with a yield above 98.94 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo), cleared for entry at Port of Tanjung Priok on the Tanjung Priok to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Indonesia importers can hand straight to their customs broker.

Filed by Fang Yu, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-I1 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-I1 (Custom Industrial Motherboard for Fanless and Wide-Temperature Control) as the lead SKU for Jakarta and Indonesia programmes:

• Industrial HMI panel: a machine builder replaces an aging Windows panel with a fanless HMI running a Yocto image and a custom UI.
• PLC upgrade retrofit: a plant keeps the field wiring and swaps the controller for a CAN-equipped board with Modbus passthrough.
• SCADA edge node: a utility deploys DIN-rail controllers that aggregate substation data and push it over dual Gigabit links.
• Machine vision inspection: the 6 TOPS NPU runs defect classification at line speed on a 3.5-inch SBC inside the cabinet.
• Data acquisition gateway: a multi-serial variant logs sensor traffic from RS485 chains and buffers it during link loss.
• Factory automation cell: a systems integrator drives a robot cell and its safety stack from one wide-temperature board.
• Outdoor kiosk controller: an unattended terminal survives summer heat in a sealed enclosure with no fan to clog.
• Predictive maintenance: vibration and acoustic models run locally on the NPU and alarm before the PLC does.

Partnership Models for Jakarta Buyers

The WF-C3588 custom line is available to Indonesia partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from Longgang under one documentation pack covering CE, FCC, UKCA, RoHS and IEC 62368-1. A Jakarta first order on the WF-C3588-I1 is normally the 8GB + 32GB (WF-C3588-I1-B) configuration at MOQ 5,000 units per shipment, standard samples in 1-3 days and 15-30 days to production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Practically the layers that decide whether the board fits your product: the PCB layout and outline, the memory and storage fit (4GB to 32GB LPDDR4X/LPDDR5, eMMC to 128GB plus NVMe or SATA), the display interface mix (HDMI 2.1, DP 1.4, LVDS/eDP/MIPI), the I/O bank (CAN, RS232/RS485 multi-serial, relays, digital I/O), the wireless stack, and the enclosure or DIN-rail chassis. On top of that sit the firmware options: custom Android ROM with a locked launcher, custom Linux or Yocto image, pre-installed applications, custom boot animation and OTA updates. A Indonesia buyer can start from a standard WF-C3588 variant and change one layer, or bring a full schematic and have the carrier designed from scratch.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how Indonesia partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Samples of standard variants leave the factory in 1-3 days. Custom builds run 15-30 days to mass production once the design is signed off, with the schematic review and carrier design handled in the same window. MOQ sits at 5,000 units per shipment on standard configurations, custom runs are quoted against volume, and small pilot batches are accepted for first-article programmes.

What certifications does a custom board need for Indonesia, and who handles them?

Answer: AndroidSBC handles them at the factory. Every lot ships with a Declaration of Conformity and a Technical File covering CE (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), FCC Part 15, UKCA where relevant, RoHS 2.0 and the REACH declaration, all dated within the prior twelve months. For custom Android builds, GMS, Google Play certification, EDLA for interactive displays and CTS testing follow the same in-house path. Where a Indonesia market needs an additional national mark, the export desk confirms coverage before the order is confirmed rather than after.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum supply, patches maintained across the firmware lines, OTA for firmware and NPU model updates. For a Indonesia programme running a custom board in the field, that commitment is written into the agreement at signature, which is what separates a source factory from a catalogue reseller.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-I1 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a Indonesia integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-I1 Sourcing Conversation

Wanlin Manufacturing Group sells the WF-C3588 custom motherboard line overseas through AndroidSBC. Jakarta and Indonesia importers, brand owners and channel distributors who want to source the custom industrial motherboard for fanless and wide-temperature control direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: SDPPI type approval with SNI conformity for domestic sale for Indonesia, administered by SDPPI (Kominfo), entering at Port of Tanjung Priok on the Tanjung Priok to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up a custom board review, include the target volume, the I/O and firmware changes you need, and your preferred Incoterm. With those in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.