12V DC Power Input Retail Board for Smart Retail Terminal, WF-N8801, AndroidSBC, Jakarta

TL;DR: 12V DC Power Input Retail Board for Smart Retail Terminal

AndroidSBC factory floor: WF-N new retail terminal boards move onto a second SMT shift serving Jakarta, Indonesia. The WF-N8801 new retail smart terminal Android motherboard spans the dual-screen new retail smart terminal and eight sister models (WF-N8800 through WF-H6180), all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the Mali-G610 MP4 GPU and 6 TOPS NPU, dual HDMI 2.0 4K 60fps plus dual LVDS, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-N family from the Longgang source factory in Shenzhen to Jakarta and Indonesia importers who run new retail smart terminal, self-service kiosk, smart vending machine, smart locker, dual-screen POS, digital signage and unmanned-store programs.

About AndroidSBC and the New Retail Smart Terminal Android Motherboard Family

AndroidSBC, the export arm of Wanlin Manufacturing Group, keeps the WF-N new retail smart terminal family on a single driver base so that a Jakarta integrator can move from an A133 price-checker terminal to an RK3588 AI vending machine without rewriting the application layer. Both ends of the ladder ship from the same Longgang SMT line with the same certification paperwork. For Indonesia specifically, the WF-N family compresses the self-checkout lane, the vending wall, the parcel locker bank and the signage network into one source factory covering the Rockchip RK3588 premium tier, the RK3568 and RK3566 mid tier and the Allwinner A133 and H618 entry tier.

WF-N8801 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-N8801 (dual-screen new retail smart terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Indonesia importers sourcing the WF-N family, the WF-N8801-A variant is the typical configuration for the dual-screen new retail counter terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing New Retail Smart Terminal Android Motherboards for Indonesia Buyers

For Jakarta and Indonesia operators, the usual failure point on an unattended terminal fleet is not the silicon, it is the software lifecycle: screens go dark after an OTA push, watchdog resets go unnoticed, and the supplier has no spare-board policy. AndroidSBC writes the OTA staging, the watchdog behaviour and the DOA replacement window into the WF-N supply agreement.

SDPPI (Kominfo) conformity plus SDPPI type approval with SNI conformity for domestic sale is the typical Indonesia pathway for self-service kiosk boards shipping with WiFi 6, Bluetooth 5.0 and 4G LTE. The WF-N family from AndroidSBC puts the paperwork into the Port of Jakarta shipment so Jakarta importers clear customs in one pass. A 105500-unit WF-N new retail smart terminal Android motherboard order for Jakarta, Indonesia cleared the burn-in station on September 16, 2026 and moved to packing on the Jakarta - Shenzhen lane.

Competitive Comparison: WF-N8801 vs Competing New Retail Smart Terminal Android Boards

For Indonesia buyers evaluating Chinese new retail smart terminal motherboard factories, four technical points separate the WF-N family from competing boards. AndroidSBC, a Wanlin Manufacturing Group export brand, scores on all four:

• vs single-platform 28nm boards: the WF-N family covers the Rockchip RK3588 8nm premium tier, the RK3568 and RK3566 22nm mid tier and the Allwinner A133 and H618 entry tier out of one Shenzhen source factory.
• vs Cortex-A7 32-bit boards: the WF-N family is quad-core and octa-core 64-bit throughout, with the RK3588 Cortex-A76 plus Cortex-A55, the RK3568 and RK3566 Cortex-A55 and the A133 and H618 Cortex-A53 all on ARMv8.
• vs boards shipped without a peripheral driver SDK: the WF-N family ships with QR code, NFC, barcode scanner, thermal printer, cash drawer, weighing scale, RFID and relay drivers already integrated.
• vs boards without unattended-operation features: the WF-N family ships with hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and OTA content management out of the box.

Global New Retail Smart Terminal / Self-Service Kiosk / Smart Vending Market Trends

Grand View Research puts the global interactive kiosk segment at USD 33.4 billion in 2025 and forecasts a 6.8% CAGR through 2030 (Grand View Research, Interactive Kiosk Market Outlook, 2025-2030). That number is shaping how Indonesia integrators place orders for the dual-screen new retail smart terminal category. For Jakarta specifically, buying patterns in supermarket self-checkout lanes, quick-service ordering kiosks, parcel locker banks and shopping-mall signage line up with three AndroidSBC priority areas:

• Self-checkout lanes and dual-screen POS counters: WF-N8801 is the usual pick for chain-store procurement.
• Smart vending and parcel locker banks: WF-N8801 plus the mid-tier WF-N3601 and entry-tier WF-N3602 sister SKUs form the unattended-retail ladder.
• Digital signage and promotional display networks: WF-N8801 plus the multi-screen sister SKUs cover the signage segment.

Across Indonesia, the pattern is consistent: one integrator wins a retail chain, then needs three board tiers at once. The WF-N family from AndroidSBC covers all three from one Longgang production line with a 1-3 day sample lead.

Partner Success Story: Meridian Retail Systems (new retail terminal integrator)

A recent Meridian Retail Systems deployment in the EMEA grocery retail segment shows how the WF-N new retail smart terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Jakarta integrators. rolled out 105500 WF-N new retail smart terminal Android motherboards across 42 supermarket branches in the EMEA grocery group.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Retail Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, or Allwinner A133 and H618 entry tier as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering QR code, NFC, barcode scanner, thermal printer, relay and RFID modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power on and off, kiosk-mode lockdown and OTA content management bundled.
• Compliance paperwork: CE / FCC / RoHS plus SDPPI (Kominfo) conformity, all bundled into the Shenzhen source-factory shipment.

According to Meridian Retail Systems Chief Technology Officer, EMEA Grocery Group: Meridian Retail Systems picked the WF-N family from AndroidSBC because the Rockchip RK3588 premium tier, the RK3568 mid tier and the Allwinner A133 entry tier share one firmware baseline and one CE / FCC file set.

Field Report: dual-screen counter terminal refresh at a national supermarket chain

BAOLONG, Shenzhen, September 16, 2026 - Shen Lu, AndroidSBC field desk. A Wanlin Longgang quality inspector noted that the WF-N8801 dual-screen new retail smart terminal order for Indonesia cleared burn-in on schedule, passing the relay and GPIO cycling test used on locker and vending controllers. The WF-N8801 new retail smart terminal Android motherboard order for Jakarta, Indonesia cleared the burn-in station on schedule and is en route via the Jakarta - Shenzhen lane.

The WF-N8801 dual-screen new retail smart terminal production lot includes the WF-N8801-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Indonesia integrators, the SDPPI (Kominfo) conformity plus SDPPI type approval with SNI conformity for domestic sale paperwork is bundled.

Filed by Shen Lu, AndroidSBC field desk, BAOLONG, Shenzhen. SDPPI plus SNI; Jakarta and Surabaya mini-mart chains source entry-level POS boards.

WF-N8801 Application Scenarios

The WF-N8801 dual-screen new retail smart terminal sits inside a nine-variant WF-N new retail smart terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-N8801-A configuration is the typical build for the dual-screen new retail counter terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Self-checkout lanes and dual-screen POS counters: WF-N8801 plus WF-N3566 form the supermarket front-end ladder, with 4K HDMI plus capacitive touch.
• Convenience stores and compact counter terminals: WF-A1330 plus WF-N8801 are the usual pairing for convenience store rollouts, where counter depth is limited and the BOM target is fixed.
• Smart vending machines and unattended retail walls: WF-H6180 plus WF-A1330 cover the vending and micro-market segment.
• Parcel lockers, express lockers and pickup banks: WF-N8800 is the dedicated SKU for locker and pickup programmes, with relay and GPIO driver support.
• Digital signage, menu boards and video walls: WF-N3566 plus WF-N8800 ship for signage network rollouts.
• Self-service ordering kiosks for restaurants and QSR chains: WF-H6180 plus WF-A1330 cover the quick-service front-of-house.
• Electronic shelf labels and smart shelf gateways: WF-A1330 is the compact gateway SKU for shelf networks.
• Unmanned stores and micro-markets: WF-N8801 plus WF-H6180 ship for unattended retail rollouts.
• Vertical programmes running in Jakarta: supermarket, convenience store, vending, locker, signage, QSR, shelf network, unmanned store.

Partnership Models for Jakarta Buyers

Three partnership tracks on the WF-N family from AndroidSBC, a Wanlin Manufacturing Group export brand, are open to Jakarta integrators: OEM, ODM and distribution.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your spec on our reference design): reference design review, schematic review, PCB layout rework, custom firmware features and a custom peripheral driver SDK.
• Distribution (your channel, our stock): exclusive regional distributor rights, channel rebate, framework agreement with a one-lot-per-month cadence and priority allocation.

For Jakarta and Indonesia integrators, the OEM track on the WF-N family opens with a 100-piece pilot, and the ODM track opens with a 500-piece reference design review.

Frequently Asked Questions

Does the WF-N new retail smart terminal Android motherboard family support dual-screen terminal?

Answer: Yes. AndroidSBC ships the WF-N family with dual-screen terminal as a standard configuration; the Rockchip and Allwinner tiers share one firmware baseline and one driver package.

What is the real difference between the RK3588 tier and the other silicon tiers in the WF-N family?

Answer: RK3588 is one rung on a five-step ladder. The WF-N family starts at Allwinner A133 and H618 for cost-driven single-screen terminals, steps up to RK3566 and RK3568 for dual-screen POS and kiosk work, and tops out at RK3588 for AI vision vending and multi-screen signage. AndroidSBC keeps all five on the same Android baseline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Indonesia?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, handles the conformity paperwork as part of the source-factory shipment: CE, FCC, UKCA, RoHS, REACH and the SDPPI (Kominfo) registration with SDPPI type approval with SNI conformity for domestic sale that Indonesia customs asks for.

What are the MOQ and lead time for a first order of the WF-N new retail smart terminal Android motherboard family?

Answer: Sample lead is 1-3 days from one piece. OEM starts at 100 pieces. ODM starts at 500 pieces. Mass production is 15-30 days. AndroidSBC holds Shenzhen buffer stock on the RK3588, RK3568, RK3566, A133 and H618 tiers so Jakarta buyers are not waiting on a wafer allocation.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-N family?

Answer: Yes. The Longgang engineering desk handles custom Android AOSP builds, custom Linux BSP porting, custom boot animation, custom UI, pre-installed applications and peripheral driver development on the WF-N family.

How are software updates and long-term support handled on the WF-N family?

Answer: The WF-N family carries a 7-year firmware commitment. AndroidSBC publishes OTA updates in stages, keeps the previous build available for rollback, and maintains the driver package across Rockchip and Allwinner tiers.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-N family?

Answer: Yes. AndroidSBC ships to Amazon FBA and 3PL consolidation warehouses, with FOB Shenzhen, CIF Port of Jakarta or DDP options. Carton labelling, palletisation and the SDPPI (Kominfo) paperwork for Indonesia are handled by the Longgang export desk.

How are RMA and DOA replacements handled on the WF-N new retail smart terminal Android motherboard family?

Answer: DOA claims on the WF-N family are settled from Shenzhen buffer stock once the failure is documented. RMA units go back to the Longgang facility for repair or replacement under the terms written into the OEM or ODM agreement.

Contact AndroidSBC: Start Your WF-N8801 Sourcing Conversation

For the WF-N new retail smart terminal Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Jakarta integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Indonesia buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a 7-year firmware update window on the WF-N family.