High-speed Storage Guide Board for Guide Query Counter, WF-G3601, AndroidSBC, Jakarta

TL;DR: High-speed Storage Guide Board for Guide Query Counter

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-G guide kiosk board family serving Jakarta, Indonesia. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Jakarta and Indonesia importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The WF-G smart guide kiosk Android motherboard family spans venue types rather than a single product category. AndroidSBC supplies the same twelve-model family into shopping centre floor directories, tenant and product finders, supermarket price check points, pharmacy enquiry counters, airport and transit wayfinding banks, hospital and clinic orientation points, hotel and resort lobby guides, museum and exhibition interpretive displays, campus and university directories, government building service points, casino and stadium concourse guides and outdoor smart city information pillars. Jakarta integrators typically start with one venue type, prove the content stack, then reuse the board on the next site. Indonesia distributors buy the family as a catalogue and configure per client instead of re-qualifying a new board for every tender. AndroidSBC keeps buffer stock on the Rockchip and Allwinner tiers so Jakarta and Indonesia orders do not wait on a wafer allocation, and each production lot is locked to one BOM for traceability.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Indonesia importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Indonesia Buyers

The fourth obstacle is unattended reliability. A directory screen that runs from mall open to mall close, seven days a week, exposes thermal, power and storage weaknesses that a bench test in Jakarta will never show.

Working with the source factory removes the middle layer. Indonesia integrators reach the AndroidSBC engineering desk directly, Jakarta specification changes go into the next layout revision instead of into a negotiation, and failure analysis for any WF-G lot is completed by the SDPPI type approval with SNI conformity for domestic sale line that produced it, with SDPPI (Kominfo) conformity files on record for Port of Jakarta. As of September 18, 2026, 128400 boards are allocated to Jakarta and Indonesia, the 1st allocation this cycle, moving on the Jakarta - Shenzhen lane.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

Most Indonesia tenders shortlist two or three board vendors, and the shortlist usually collapses on the same axes: how many silicon options one vendor actually controls, how much of the peripheral stack is already written, and how the fleet gets updated after installation. The WF-G family is positioned against those axes for Jakarta programmes.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Certification burden is shaping vendor selection. As Indonesia tightens radio, electrical and accessibility conformity for public-facing terminals, Jakarta buyers increasingly score vendors on whether the compliance dossier, the EMC reports and the safety file travel with the lot. IDC notes the same shift in enterprise device procurement, where supply continuity and regulatory readiness now weigh as heavily as unit price in mall smart guide kiosk platform choices.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G6180 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G6180 and the industrial WF-G5270 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G5270 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

The gap between a market forecast and a Jakarta order book is the board count per venue type, and AndroidSBC publishes the per-venue assumptions it uses for Indonesia so integrators can sanity-check their own numbers.

Partner Success Story: Meridian Mall Systems (shopping centre directory integrator)

The Meridian Mall Systems rollout in the EMEA retail property segment shows how the WF-G family from AndroidSBC supports Jakarta integrators. Meridian Mall Systems rolled out 128400 WF-G smart guide kiosk boards across 38 shopping centres, replacing static floor directories with searchable tenant finders.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Mall Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus SDPPI (Kominfo) conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Meridian Mall Systems Head of Digital Property Services for EMEA Retail Property: Meridian Mall Systems standardised on the WF-G dual-screen board so the directory panel and the promotion panel run independent content from one board, with 128400 units released to the Jakarta property group in the first wave.

Field Report: floor guide counter installation at a community shopping mall

BAOLONG, Shenzhen, September 18, 2026 - Chang An, AndroidSBC field desk. A mains-cut test was run mid-burn-in: power was removed for 30 seconds and the WF-G3601 boards returned to the mall smart guide kiosk directory home screen without operator input. The WF-G3601 smart guide kiosk Android motherboard order for Jakarta, Indonesia cleared the burn-in station on schedule and is en route via the Jakarta - Shenzhen lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Indonesia integrators, the SDPPI (Kominfo) conformity plus SDPPI type approval with SNI conformity for domestic sale paperwork is bundled.

Filed by Chang An, AndroidSBC field desk, BAOLONG, Shenzhen. SDPPI plus SNI; Jakarta and Surabaya mini-mart chains source entry-level POS boards.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G3602 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3566 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G3288 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G3399 plus WF-G3602 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3566 plus WF-G3399 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3602 plus WF-G3288 carry the guest orientation flow in Jakarta.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G3399 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Jakarta: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Jakarta Buyers

AndroidSBC structures the WF-G guide kiosk programme around three partner tracks for Jakarta and Indonesia, each with a different entry quantity and a different level of design control.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC keeps the commercial structure simple for Jakarta and Indonesia: one family, three tracks, and no penalty for starting small and scaling up later.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. The WF-G family ships mall guide kiosk as a stock configuration on Rockchip and Allwinner silicon alike, flashed and functionally tested at the Wanlin Longgang source factory before the lot leaves the line for Indonesia.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The practical difference is display paths, NPU headroom, thermal range and I/O. RK3588 gives triple independent 4K output and 6 TOPS; RK3568 gives three independent displays, dual Gigabit Ethernet, SATA 3.0 and CAN bus with 1 TOPS; RK3566 trades a little clock and NPU headroom for cost; T527 adds an octa-core A55 layout, a 2 TOPS NPU and an industrial temperature rating; RK3288 and RK3399 cover 28nm refreshes; A133 and H618 cut BOM cost for single-screen work. AndroidSBC maps RK3568 to the deployment rather than to the headline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Indonesia?

Answer: Yes. The Longgang factory keeps the CE, FCC, RoHS and REACH declarations on file for the WF-G family and adds SDPPI (Kominfo) plus SDPPI type approval with SNI conformity for domestic sale for Indonesia shipments. Jakarta importers receive the full dossier with the first lot, not after it.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC quotes the WF-G family from one sample board with no minimum programme commitment. OEM private label opens at 100 pieces, ODM at 500 pieces, and the mass-production window is 15-30 days after BOM sign-off for Indonesia shipments.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Firmware customisation is handled by the same engineers who keep the reference BSP, so a Jakarta request for a custom launcher, a locked kiosk mode or an added peripheral driver goes into the maintained branch rather than into a one-off fork.

How are software updates and long-term support handled on the WF-G family?

Answer: The update model is wave-based. A Jakarta venue group can nominate a pilot site, hold the rest of the estate on the previous build, and only release the next wave once the pilot is clean. Rollback is built into the update client on every WF-G tier.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Delivery to Amazon FBA or a 3PL consolidation point is a standard option on the WF-G family, quoted on FOB Shenzhen, CIF Port of Jakarta or DDP terms for Jakarta and Indonesia partners.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes, and the replacement stock is held on the same tiers as the original order. A Jakarta partner reports a DOA unit with evidence, AndroidSBC ships a replacement from buffer stock, and the failed board is analysed at the Longgang line rather than scrapped.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Jakarta integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Indonesia buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-G family.