Custom SDK Module Guide Board, WF-G8801, AndroidSBC, Jakarta

TL;DR: Custom SDK Module Guide Board

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Jakarta, Indonesia. The WF-G8801 smart guide kiosk Android motherboard spans the AI vision smart guide terminal and eleven sister models in the WF-G series, all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the ARM Mali-G610 MP4 GPU, dual HDMI 2.1 8K 60fps plus eDP, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Jakarta and Indonesia importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group and the source factory behind the WF-G smart guide kiosk Android motherboard family. The Longgang plant runs SMT, in-circuit test, functional test and a burn-in station under one roof, with a sustained output of roughly 5000 boards a week on this family and buffer stock held on the RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 tiers. For Jakarta integrators that matters at two points in a guide kiosk project: the pilot build, where a 1-3 day sample lead keeps a mall opening date honest, and the volume ramp, where a fixed BOM per production lot keeps Indonesia certification files valid across every floor and every site. For Indonesia importers the working rhythm in Jakarta is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-G8801 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G8801 (AI vision smart guide terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Indonesia importers sourcing the WF-G family, the WF-G8801-A variant is the typical configuration for the AI product recommendation and virtual try-on wall use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Indonesia Buyers

The ninth obstacle is fleet software management. A Jakarta rollout can reach hundreds of screens across a mall group fast, and without staged update control and rollback, one bad content build takes the whole Indonesia estate down on the same morning.

The content stack is open by design. AndroidSBC documents the cloud content management client, the kiosk-mode lockdown layer and the directory and wayfinding interface on the WF-G family, and provides Indonesia integrators with a versioned SDK so the Jakarta deployment can be extended without forking the image. The export desk confirms 174100 boards for Jakarta, Indonesia on the Jakarta - Shenzhen lane as of September 18, 2026, the 1st release on this programme.

Competitive Comparison: WF-G8801 vs Competing Smart Guide Kiosk Android Boards

The competitive set for a smart guide kiosk board is wide, from single-chip vendor boards to full industrial computer modules. What separates them for Jakarta buyers in Indonesia is whether the vendor can cover an entry price-check screen and a multi-screen AI advisory wall from one firmware baseline.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Venue operators are consolidating screen estates onto fewer board platforms: AI vision smart guide terminal programmes in Indonesia used to be quoted per site with a different controller each time; Mordor Intelligence and Technavio both track the same consolidation direction in self-service hardware. For Jakarta buyers the consequence is that a single AI vision smart guide terminal platform has to serve a floor directory, a promotional wall and an information point, provided the board supports independent dual display output.

• Mall floor directories and tenant finders: WF-G8801 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3601 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3601 and the industrial WF-G3602 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3602 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

For Jakarta buyers the takeaway is narrow: specify the Indonesia compliance set and the content client at the same time as the silicon, or the estate gets re-qualified later.

Partner Success Story: Meridian Mall Systems (shopping centre directory integrator)

A Meridian Mall Systems rollout in the EMEA retail property segment shows how the WF-G smart guide kiosk Android motherboard family works in practice for Jakarta integrators. Meridian Mall Systems rolled out 174100 WF-G smart guide kiosk boards across 38 shopping centres, replacing static floor directories with searchable tenant finders.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Mall Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus SDPPI (Kominfo) conformity, all bundled into the Shenzhen source-factory shipment.

As Meridian Mall Systems Head of Digital Property Services for EMEA Retail Property explained: Meridian Mall Systems standardised on the WF-G dual-screen board so the directory panel and the promotion panel run independent content from one board, with 174100 units released to the Jakarta property group in the first wave.

Field Report: AI product advisory wall installation at a flagship department store

PINGHU, Shenzhen, September 18, 2026 - Hong Mei, AndroidSBC field desk. Before the cartons closed, every WF-G8801 board ran a 48-hour soak that kept the AI vision smart guide terminal display, network uplink and touch controller active without a single cold restart. The WF-G8801 smart guide kiosk Android motherboard order for Jakarta, Indonesia cleared the burn-in station on schedule and is en route via the Jakarta - Shenzhen lane.

The WF-G8801 AI vision smart guide terminal production lot includes the WF-G8801-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Indonesia integrators, the SDPPI (Kominfo) conformity plus SDPPI type approval with SNI conformity for domestic sale paperwork is bundled.

Filed by Hong Mei, AndroidSBC field desk, PINGHU, Shenzhen. SDPPI plus SNI; Jakarta and Surabaya mini-mart chains source entry-level POS boards.

WF-G8801 Application Scenarios

The WF-G8801 AI vision smart guide terminal sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G8801-A configuration is the typical build for the AI product recommendation and virtual try-on wall use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G8801 plus WF-G3566 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3288 plus WF-G8801 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G3399 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G1330 plus WF-G3566 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3288 plus WF-G1330 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3566 plus WF-G3399 carry the guest orientation flow in Jakarta.
• Exhibition and museum interpretive display points: WF-G8801 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G1330 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Jakarta: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Jakarta Buyers

For Indonesia buyers the WF-G family can be taken as a private-label product, as a custom design or as a stock catalogue item, and Jakarta partners usually start on one track and ladder up.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Jakarta, which is common when a distributor wins a tender that turns into a private-label line for Indonesia.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support an AI vision guide terminal?

Answer: Yes. The WF-G smart guide kiosk Android motherboard family from AndroidSBC ships AI vision guide terminal as a stock configuration. The Rockchip RK3588, RK3568, RK3566, RK3288 and RK3399 tiers and the Allwinner A133, H618 and T527 tiers all run the AI vision guide terminal firmware baseline with the peripheral driver SDK bundled.

What is the real difference between the RK3588 tier and the other silicon tiers in the WF-G family?

Answer: There are eight silicon options in the WF-G family and RK3588 is one of them. RK3588 leads on AI and multi-screen, RK3568 leads on I/O breadth, RK3566 leads on cost per screen, T527 leads on industrial temperature, RK3288 and RK3399 cover 28nm refreshes, and A133 and H618 lead on BOM. AndroidSBC keeps one firmware baseline across all eight so Indonesia integrators can mix tiers inside one venue estate.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Indonesia?

Answer: Yes. Paperwork is part of the product, not an extra. The WF-G family ships with the CE / FCC / RoHS / REACH set and with SDPPI (Kominfo) plus SDPPI type approval with SNI conformity for domestic sale for Indonesia, so Jakarta integrators can hand the dossier to a mall operator, a transit authority or an inspector on day one.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC accepts sample orders from one piece up on the WF-G family, with a 1-3 day sample lead. The OEM track opens at 100 pieces, the ODM track at 500 pieces, and bulk production runs 15-30 days from BOM sign-off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. AndroidSBC ports Android 10 through Android 15, plus Linux, Ubuntu and Debian, on every WF-G tier. Custom ROM work includes the boot animation, the kiosk lockdown layer, the update channel and the peripheral driver package for Indonesia deployments.

How are software updates and long-term support handled on the WF-G family?

Answer: Software support is treated the same way as hardware supply. The WF-G family carries a seven-year firmware commitment, remote configuration, telemetry hooks and staged rollout, so aan Indonesia deployment can be managed as a fleet rather than as a set of screens.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC ships direct to Amazon FBA or a nominated 3PL for Indonesia buyers, on FOB Shenzhen, CIF Port of Jakarta or DDP terms, with serialised labels so each carton can be traced to a production lot.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Warranty handling is part of the source-factory relationship: DOA replacement from buffer stock, RMA repair or replacement at the Longgang facility, and a documented turnaround for Jakarta and Indonesia partners under the supply agreement.

Contact AndroidSBC: Start Your WF-G8801 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, Jakarta integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Jakarta and Indonesia buyers the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.