RK3576 POS Terminal Motherboard for Convenience Store Counter, WF-P7601, AndroidSBC, Jakarta

TL;DR: RK3576 POS Terminal Motherboard for Convenience Store Counter

AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Jakarta, Indonesia. The WF-P7601 POS Android motherboard spans the AI face payment POS terminal with 3D camera input and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, MIPI DSI plus HDMI output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Jakarta and Indonesia importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

The WF-P family covers the full span a Jakarta retail group will meet in one refresh cycle: a 2GB entry counter board for small format stores, a 4GB dual-screen tier for restaurants, an 8GB AI tier for face payment, and a wide-temperature industrial tier for unattended cabinets that sit outside. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Jakarta partner can trace a single board back to its run.

WF-P7601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7601 (AI face payment POS terminal with 3D camera input) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Indonesia importers sourcing the WF-P family, the WF-P7601-A variant is the typical configuration for the face payment counter deployment use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for Indonesia Buyers

Then there is the fiscal layer. In Indonesia the receipt has to be produced in a form the tax authority recognises, which means the printer handshake, the log retention and the receipt font set have to be right before the first store opens.

AndroidSBC answers the continuity problem with a frozen bill of materials. Each WF-P production lot is built against a fixed BOM and a fixed silicon tier, and the SDPPI (Kominfo) documentation records the actual parts used, so the Jakarta partner re-ordering in a year receives a board that behaves the same way. The Jakarta frame agreement converted to a firm order on September 23, 2026 - 15200 boards, Jakarta - Shenzhen lane, one BOM, one firmware baseline, and the Indonesia compliance pack bundled.

Competitive Comparison: WF-P7601 vs Competing POS Android Boards

What follows is not a spec-sheet comparison. It is the four questions a Jakarta chain asks after its first failed rollout.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Fixed countertop terminals still account for the largest share of the market by product type, and hardware remains the largest share by component. That matters to a Jakarta buyer because it means the board is the part being replaced, while the enclosure, the panel and the counter harness are often re-used.

• Entry counter tier: WF-P7601 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P3601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The Indonesia demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the WF-P price list, MOQ and lead time because a Jakarta partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Meridian Retail Systems (supermarket checkout lane integrator)

A recent Meridian Retail Systems deployment in the EMEA grocery retail segment shows how the WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Jakarta integrators. Meridian Retail Systems rolled out 15200 WF-P dual-screen boards across 68 supermarket checkout lanes.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Retail Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus SDPPI (Kominfo) conformity, all bundled into the Shenzhen source-factory shipment.

According to Meridian Retail Systems Head of Store Platforms for EMEA Grocery Retail: Meridian Retail Systems standardised on the WF-P dual-screen board so the cashier screen and the customer display run from one board, with 15200 units released into the Jakarta grocery group in the first wave.

Field Report: face payment counter deployment across a convenience chain

NANSHAN, September 23, 2026 - Gong Li, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-P7601 finished the burn-in at the top of the temperature window rather than at 25C, which is the condition a sealed counter actually presents. The WF-P7601 POS Android motherboard order for Jakarta, Indonesia cleared the burn-in station on schedule and is en route via the Jakarta - Shenzhen lane.

The WF-P7601 AI face payment POS terminal with 3D camera input production lot includes the WF-P7601-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For Indonesia integrators, the SDPPI (Kominfo) conformity plus SDPPI type approval with SNI conformity for domestic sale paperwork is bundled.

Filed by Gong Li, AndroidSBC field desk, NANSHAN. Indonesian retailers ask for SDPPI approval and local QRIS wallet support demonstrated on the customer display during the pilot.

WF-P7601 Application Scenarios

The WF-P7601 AI face payment POS terminal with 3D camera input sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7601-A configuration is the typical build for the face payment counter deployment use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P7601 drives the cashier screen while the second lane carries the customer display or the promotion wall in Jakarta.
• Convenience and small format stores: the WF-P3602 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P3566 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P3288 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P3399 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Jakarta: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Jakarta Buyers

For Jakarta and Indonesia buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and Indonesia partners usually convert within one quarter.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support an AI face payment POS terminal with 3D camera input?

Answer: Yes. AndroidSBC validates AI face payment POS terminal with 3D camera input on the bench with the actual peripherals the Jakarta partner intends to use, and the result is written into the shipment file.

Which silicon tiers are available in the WF-P family for Indonesia buyers?

Answer: Available tiers are RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. AndroidSBC holds one fixed BOM per lot, so the Jakarta partner always knows which tier is shipping.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Jakarta partner printer and scanner models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for Indonesia?

Answer: For Jakarta buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen BOM.

How are firmware updates delivered to aan Indonesia estate after deployment?

Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.

What shipping terms does AndroidSBC support for Indonesia orders?

Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Jakarta partner books the lane that suits the import process.

What happens if a board fails in the field in Indonesia?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Jakarta programme so the lane is not down for a full lead time.

Contact AndroidSBC: Start Your WF-P7601 Sourcing Conversation

For the WF-P POS Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Jakarta integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Indonesia buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.