X9 Commercial Display Motherboard for Digital Signage, WF-X9-05, AndroidSBC, Jakarta

TL;DR: X9 Commercial Display Motherboard for Digital Signage

AndroidSBC release: twelve-configuration X9 Android motherboard family opens for volume export orders serving Jakarta, Indonesia. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Jakarta and Indonesia importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

The X9 family covers the full span a Jakarta screen network will meet in one refresh cycle: a 1GB plus 8GB entry player for indoor posters, a 2GB plus 16GB interactive tier for query kiosks, and a wide-temperature tier for unattended cabinets that sit outside or on a factory floor. Each production lot is burned in for 72 hours with the panel, the touch frame and the playback loop running, and the serial number is logged against the test record so a Jakarta partner can trace a single board back to its run.

WF-X9-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Indonesia importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Indonesia Buyers

Then there is the content layer. In Indonesia the publishing software the operator already runs has to work on day one, which means the playback modes, the scheduled power cycle and the remote update path have to be right before the first screen is installed.

AndroidSBC answers the panel matching problem with a documented jumper map. Each X9 lot ships with the panel voltage selection, the pin-one orientation note and the backlight current limit for the Jakarta panel model, and the SDPPI (Kominfo) file records the configuration that was actually validated. The Jakarta frame agreement converted to a firm order on September 24, 2026 - 14000 boards, Jakarta - Shenzhen lane, one bill of materials, one firmware baseline, and the Indonesia compliance pack bundled.

Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards

What follows is not a spec-sheet comparison. It is the four questions a Jakarta operator asks after its first failed rollout.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Jakarta integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Jakarta usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Jakarta integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Jakarta.

Global Digital Signage and Commercial Display Market Trends

Video screens account for roughly 50.2 percent of the market by type and retail for about 50.1 percent by application. That matters to a Jakarta buyer because it means the board is the part being specified, while the enclosure, the panel and the mounting hardware are often reused.

• Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-07 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-08 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

The Indonesia demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the X9 price list, MOQ and lead time because a Jakarta partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Meridian Display Systems (supermarket and retail media screen integrator)

A recent Meridian Display Systems deployment in the EMEA retail media segment shows how the X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Jakarta integrators. Meridian Display Systems rolled out 14000 X9 boards across 68 supermarket and retail media screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Display Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus SDPPI (Kominfo) conformity, all bundled into the Shenzhen source-factory shipment.

According to Meridian Display Systems Head of Store Platforms for EMEA Retail Media: Meridian Display Systems standardised on the X9 board so one Android 10 image runs the whole estate, with 14000 units released into the Jakarta grocery group in the first wave.

Field Report: interactive kiosk rollout at a municipal service point

YANTIAN, September 24, 2026 - Huan Xi, AndroidSBC field desk. Thermal behaviour was the last gate: the WF-X9-05 finished the burn-in at the top of the -20C to 70C window rather than at 25C, which is the condition a sealed enclosure actually presents. The WF-X9-05 X9 Android motherboard order for Jakarta, Indonesia cleared the burn-in station on schedule and is en route via the Jakarta - Shenzhen lane.

The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Indonesia integrators, the SDPPI (Kominfo) conformity plus SDPPI type approval with SNI conformity for domestic sale paperwork is bundled.

Filed by Huan Xi, AndroidSBC field desk, YANTIAN. Indonesian operators ask for SDPPI approval and local QRIS wallet support demonstrated on the interactive screen during the pilot.

WF-X9-05 Application Scenarios

The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-09 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-10 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-11 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-12 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Jakarta: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Jakarta Buyers

For Jakarta and Indonesia buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

Entry to any of the three tracks starts with a sample batch and a panel validation run, and Indonesia partners usually convert within one quarter.

Frequently Asked Questions

Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?

Answer: Yes. AndroidSBC validates infrared touch all-in-one for interactive kiosks on the bench with the actual panel and touch model the Jakarta partner intends to use, and the result is written into the shipment file.

Which configurations are available in the X9 family for Indonesia buyers?

Answer: Memory runs 1GB or 2GB LPDDR4 and storage 8GB, 16GB or 32GB onboard eMMC. AndroidSBC holds one fixed bill of materials per lot, so the Jakarta partner always knows which combination is shipping.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes. AndroidSBC validates the exact combination on the Longgang bench using the Jakarta partner panel and touch models, and the validated configuration is locked as the production reference.

What is the minimum order quantity and the sample lead time for Indonesia?

Answer: For Jakarta buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC provides custom Android AOSP builds, custom boot animation and logo, pre-installed apps, custom UI, BSP porting and SDK modules, all built against a frozen bill of materials.

How are firmware updates delivered to aan Indonesia screen estate after deployment?

Answer: Firmware is delivered over the network, by USB or by TF card, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the X9 family.

What shipping terms does AndroidSBC support for Indonesia orders?

Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Jakarta partner books the lane that suits the import process.

What happens if a board fails in the field in Indonesia?

Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Jakarta programme so the screen is not dark for a full lead time.

Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation

For the X9 Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Jakarta integrators:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Indonesia buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the X9 family.