HDMI Output Payment Terminal Board with 5G Modem, WF-SPT-11, AndroidSBC, Jakarta

TL;DR: HDMI Output Payment Terminal Board with 5G Modem

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving Jakarta, Indonesia. The WF-SPT-11 smart payment terminal Android motherboard covers the multimedia payment terminal build with customer screen and eleven sister configurations in the WF-SPT series, spanning the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, 6-inch 1080x1920 MIPI DSI plus HDMI 2.0a customer screen output, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Jakarta and Indonesia importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

The WF-SPT line exists because payment hardware buyers in Indonesia rarely want a new board design - they want the same board with a different modem, a different panel and a different certification file. AndroidSBC holds those variables inside one family, and the Jakarta buyer picks the configuration rather than commissioning a new PCB. The qualification work happens on the Longgang bench with the actual printer mechanism, reader antenna and scan engine the Indonesia integrator intends to buy, and the current draw, the print speed and the decode result are written into the shipment file rather than left for the integrator to discover on site.

WF-SPT-11 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Indonesia importers sourcing the WF-SPT family, the WF-SPT-11-A variant is the typical configuration for the cinema, stadium and theme park ticketing counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Indonesia Buyers

The first problem Jakarta buyers hit is the difference between a sample that works and a configuration that repeats. A board can pass a bench test and still fail in volume if the printer driver, the scan engine mapping and the modem band list were never documented as part of the delivery.

Spare parts are the sixth problem. Aan Indonesia estate needs a repair path that does not depend on a single production batch, which is why AndroidSBC holds the bill of materials for the life of the configuration rather than re-spinning the board on every order. What Jakarta integrators get is a board that repeats: 68500 units now, 68500 more next quarter, the same connector map, the same printer pinout, the same Android baseline, all moving on the Jakarta - Shenzhen lane into Indonesia.

Competitive Comparison: WF-SPT-11 vs Competing Smart Payment Terminal Motherboards

Aan Indonesia integrator comparing two boards should compare the delivery file, not the datasheet. One side ships a test report and a compliance set; the other ships a board and a promise.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Jakarta buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Indonesia integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Jakarta is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

Market growth in Indonesia is concentrating in the formats where a human is not present at the moment of payment, which puts the watchdog, the modem band list and the offline buffer at the top of the Jakarta specification.

• Countertop tier: WF-SPT-12 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The Indonesia market is large enough to absorb several suppliers and disciplined enough to punish the ones who re-spin boards between lots. Holding the configuration is the strategy, and it is the one AndroidSBC runs for Jakarta.

Partner Success Story: Kanto Retail Engineering (convenience retail integrator)

When Kanto Retail Engineering reviewed the Japan convenience retail market, the shortlist came down to whether a supplier would hold a configuration for the length of the agreement. Kanto Retail Engineering installed 68500 WF-SPT boards across 158 convenience stores.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Retail Engineering branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus SDPPI (Kominfo) conformity, all bundled into the Shenzhen source-factory shipment.

Kanto Retail Engineering Quality Manager for Japan Convenience Retail: "Kanto Retail Engineering accepted the smart payment terminal board after the test report format was agreed, and 68500 units moved into the Jakarta convenience estate on schedule."

Field Report: ticketing counter rollout at a cinema and stadium operator

YANTIAN, September 30, 2026 - Feng Chi, AndroidSBC field desk. The WF-SPT-11 configuration was built for the multimedia payment terminal build with customer screen use case, and the Indonesia team ran the acceptance test with the same printer mechanism and reader antenna the integrator will install. The WF-SPT-11 payment terminal board order for Jakarta, Indonesia cleared the burn-in station on schedule and is en route via the Jakarta - Shenzhen lane.

The WF-SPT-11 multimedia payment terminal build with customer screen production lot includes the WF-SPT-11-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For Indonesia integrators, the SDPPI (Kominfo) conformity plus SDPPI type approval with SNI conformity for domestic sale paperwork is bundled.

Filed by Feng Chi, AndroidSBC field desk, YANTIAN. Indonesian rollouts span islands, so remote OTA management matters more than on-site service.

WF-SPT-11 Application Scenarios

The WF-SPT-11 multimedia payment terminal build with customer screen sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-11-A configuration is the typical build for the cinema, stadium and theme park ticketing counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-08 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Jakarta Buyers

For Jakarta partners the choice is between stocking the board, integrating the board or branding the board, and each track carries a different level of engineering support.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks ship from the same source factory with the same compliance file, which is why Jakarta partners can move between them as aan Indonesia programme grows.

Frequently Asked Questions

Does the smart payment terminal board family support a multimedia payment terminal build with customer screen?

Answer: Yes. The multimedia payment terminal build with customer screen ships as a standard configuration, qualified on the Longgang bench with the printer mechanism, the reader antenna and the scan engine that the Jakarta integrator will install.

Which configurations are available in the WF-SPT family for Indonesia buyers?

Answer: Twelve configurations span Rockchip H618 and the rest of the range: RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527, all on one peripheral contract.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. One WF-SPT board drives the touch panel, the thermal printer and the scan engine simultaneously, and the current budget for all three is measured on the bench and written into the shipment file.

What payment scheme certification support does AndroidSBC provide for Indonesia?

Answer: The compliance file for Indonesia covers SDPPI type approval with SNI conformity for domestic sale testing and SDPPI (Kominfo) conformity, issued against the exact configuration that ships to Jakarta rather than a generic family file.

What is the minimum order quantity and the sample lead time for Indonesia?

Answer: The minimum for a customised build is higher than for a stock configuration, but a Jakarta buyer can start with a sample lot, qualify it on the bench, and then move to a production slot without re-qualification.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering team supports driver development, API integration, locale packs and application pre-install, and the resulting image is signed and staged into OTA groups for Jakarta.

How are firmware updates delivered to aan Indonesia device estate after deployment?

Answer: Firmware is delivered as signed images through staged OTA groups with rollback, so aan Indonesia estate can be updated in waves rather than all at once, with a published maintenance window.

What shipping terms does AndroidSBC support for Indonesia orders?

Answer: AndroidSBC supports EXW, FOB, CIF and DAP, quotes Port of Jakarta as the default port for Indonesia, and prepares the customs file before the container closes for Jakarta.

Contact AndroidSBC: Start Your WF-SPT-11 Sourcing Conversation

Every Jakarta programme starts the same way at AndroidSBC: the format, the peripherals, the certification calendar, then a quotation that holds the configuration for the term.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM, ODM and private-label tracks are open for Indonesia. AndroidSBC supplies the board, the firmware, the documentation and the qualification support, and Jakarta partners own the channel.