Anti-vibration Industrial Design, WF-RK3568, AndroidSBC, Jakarta

TL;DR: Anti-vibration Industrial Design

LONGGANG, Shenzhen, September 10, 2026 - The Rockchip RK3568 line at Wanlin Longgang closed lot 383 this week: 24,430 WF-RK3568 boards bound for Jakarta, Indonesia, each unit traceable to its own burn-in barcode.

AndroidSBC sourcing desk update on Allwinner and Rockchip board allocation serving Jakarta, Indonesia. What Indonesia importers get from the WF-Series is platform breadth from one factory. Three Allwinner parts and four Rockchip parts sit under one part-number scheme, with two SOM modules for customers who design their own carrier. Wanlin builds all nine at Longgang in Shenzhen, and the export desk issues one certification pack per lot covering CE, FCC, UKCA, RoHS, and REACH.

About AndroidSBC and the Rockchip RK3568 Board Family

Wanlin Manufacturing Group has been building Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-Series is the current custom board line: Allwinner A133, H618, and T527 on one side, Rockchip RK3588, RK3568, RK3566, and RK3288 on the other, with WF-A133S and WF-RK3588S covering buyers who want an SOM plus their own carrier. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks, and EMC pre-compliance bench. Jakarta and Indonesia buyers typically come to the WF-Series for one of three reasons: a multi-platform catalogue, a source factory that will take OEM branding work, or a supplier who will carry the certification paperwork instead of leaving it to the importer.

WF-RK3568 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3568 (Industrial Edge Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Indonesia importers sourcing the WF-Series, the 4GB + 32GB (WF-RK3568-A) variant is the typical configuration for the industrial edge computing use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Industrial Edge Computing Board for Indonesia Buyers

Buyers in Jakarta who have run the industrial edge computing board category for a few years tend to stop shopping on price alone. The Rockchip RK3568 allocation is the real constraint, and it is the reason a 24,430-unit order can look cheap on paper and expensive in a slipped quarter. Then comes the firmware question. The hardware spec is straightforward to verify; whether the board holds a credential-locked stack through a 72-hour loop and a field OTA is a different test, and it is normally the Jakarta buyer's warehouse that discovers the answer.

Documentation is the third item on the list. A CE mark without a matching Declaration of Conformity and Technical File is not a marking problem, it is a customs problem, and it tends to surface after the goods are already on the water. AndroidSBC's approach is to close the gap at the factory gate. The certified stack is loaded on the Longgang line, the burn-in record is traceable per unit barcode, and the CE and FCC test reports are dated inside twelve months and shipped with the lot. The nine WF-Series boards span industrial edge computing, commercial display controller, industrial HMI, IoT gateway, smart display terminal, machine monitoring, access control, and building automation, with three memory configurations per model for Jakarta buyers who need a standard SKU rather than a custom build.

Indonesia importers usually raise compliance first. In Indonesia SDPPI type approval is held by the local importer, and the SNI mark is checked separately for goods offered in the domestic market. AndroidSBC answers it by preparing the SDPPI type approval with SNI conformity for domestic sale documentation for SDPPI (Kominfo) before the lot is packed, issuing it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and routing the lot through Port of Tanjung Priok on the Tanjung Priok to Shekou lane.

Competitive Comparison: WF-RK3568 vs Competing RK3568 Boards

Three groups of board compete for the industrial edge computing board socket. The first is legacy silicon sold on price with no certification file. The second is Cortex-A55 hardware that carries certification but caps the decoder early. The third holds both and treats expansion as part of the design. The WF-RK3568 sits in the third group, and the separation comes from Rockchip RK3568, from a display path that holds under a continuous loop, and from the certified image burned per lot at Longgang.

• vs RK3288 Cortex-A17 boards: the RK3568 Cortex-A55 2.0GHz lifts integer throughput by roughly 2x at lower idle power.
• vs RK3566 boards: the RK3568 adds dual Gigabit Ethernet plus CAN bus for gateway-class builds.
• vs RK3588 boards: the RK3568 keeps a materially lower BOM where 4K@60fps decode is sufficient.
• vs x86 fan-cooled IPC: the RK3568 fanless design removes the only moving part from the enclosure.

Global Industrial Edge Computing and Smart Display Market Trends

Order timing in Indonesia now follows the Industrial Edge Computing and Smart Display curve rather than the old annual budget cycle. Global Growth Insights sizes the Android TV Box segment at USD 12.45 billion for 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, 2025-2035), and that consumer volume is the reference point Indonesia buyers use when they argue about lead time. In Jakarta, it shows up as three distinct demand patterns across the WF-Series:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3568 board carries that headroom without a board change.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.

Analysts covering the Industrial Edge Computing and Smart Display space point to the same pattern in Indonesia: order books are being built around platform breadth rather than a single part number.

The common thread for Indonesia is that single orders are giving way to blanket agreements released monthly, which is what a twelve-month retail or hospitality programme needs in order to avoid a gap in the middle of the year.

Partner Success Story: SmartRetail Networks in Jakarta, Indonesia

SmartRetail Networks, a digital out-of-home media operator serving the Indonesia market, deployed 5,400 units of the WF-A133 advertising media player board across two mall DOOH networks. The rollout covered the industrial edge computing, industrial hmi, and machine monitoring workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,400 units of the WF-A133 advertising media player board across two mall DOOH networks
• Region: Jakarta, Indonesia
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Tanjung Priok via the Tanjung Priok to Shekou lane

"The A133 board runs a 4K loop behind a passive heatsink in a corridor that hits 48C in summer. Two years in, the field failure rate is under half a percent, and that is the only number our client cares about."

- Ahmed Al-Maktoum, Chief Technology Officer

Field Report: a control room in Jakarta where 24,430 units of the WF-RK3568 board are driving a video wall installation

Reporter Yu Cheng, on the ground in Jakarta, Indonesia. The integrator mounted the WF-RK3568 boards in the control room rack and spent two days on display mapping and colour matching across the wall. The boards held four independent outputs through the full commissioning window without a thermal throttle, and the operator console was handed over on schedule.

The line supervisor logged a 41-minute changeover between the WF-RK3568 run and the next lot, which is the kind of number that decides whether a mid-quarter top-up order can be absorbed.

The inspection confirmed three things on the spot: the WF-RK3568 units hold the burn-in with a yield above 99.06 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering SDPPI type approval with SNI conformity for domestic sale administered by SDPPI (Kominfo), cleared for entry at Port of Tanjung Priok on the Tanjung Priok to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that Indonesia importers can hand straight to their customs broker.

Filed by Yu Cheng, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3568 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3568 (Industrial Edge Computing Board) as the lead SKU for Jakarta and Indonesia programmes:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Commercial display controller: WF-RK3568 drives the 4K@60fps panel pair over HDMI 2.0 and eDP.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.
• IoT gateway: WF-RK3568 bridges CAN bus and RS485 field devices onto Ethernet.
• Smart display terminal: WF-RK3568 renders the Android 11 UI on the dual display path.
• Machine monitoring: WF-RK3568 timestamps production data against the onboard RTC.
• Access control: WF-RK3568 runs face recognition on the NPU with the MIPI CSI feed.
• Building automation: WF-RK3568 runs 7x24 with hardware watchdog and scheduled restart.

Partnership Models for Jakarta Buyers

AndroidSBC runs three engagement tiers for Indonesia importers and brand owners sourcing a industrial edge computing board:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Every tier draws on the same Longgang line and the same certification desk. A Jakarta first order on the WF-RK3568 normally lands on the 4GB + 32GB (WF-RK3568-A) configuration at MOQ 5,000 units per shipment, with samples in four weeks and production in six.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for Indonesia?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a Indonesia market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a Indonesia partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3568 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3568 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Jakarta and Indonesia importers, brand owners, and distributors who want the industrial edge computing board direct from the Longgang plant can reach the export desk at:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: SDPPI type approval with SNI conformity for domestic sale for Indonesia, administered by SDPPI (Kominfo), entering at Port of Tanjung Priok on the Tanjung Priok to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For an OEM or ODM conversation, it helps to state the target annual volume, the certification scope required (CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, or Dolby Audio), and the preferred Incoterm (FOB Yantian, FOB Shekou, CIF, DDP, or DDP-Amazon). The export team returns a per-lot quote plus the model-by-model MOQ matrix for the WF-Series within two business days.